Preparation of geopolymer based on municipal solid waste incineration fly ash-phosphorus slag and its function for solidification of heavy metals.

Municipal solid waste incineration fly ash (MSWIFA) contains potential contaminants and needs to be efficiently solidified/stablized and so should be managed properly. To achieve this goal, alkali-activated MSWIFA and phosphorus slag (PS) based geopolymer solidified bodies were investigated. Therefore, the mechanical properties of the solidified body, heavy metal leaching characteristics, heavy metal chemical forms, and heavy metal solidification/stabilization mechanisms were also analyzed. The results show that: The addition of an appropriate amount of PS can promote the strength development of a solidified body. When the mass ratio of MSWIFA to PS is 7:3, the strength of the solidified body reaches 22.8 MPa at 90d curing age, which is 5.3 times higher than that of the unmodified material. The MSWIFA/PS immobilized Zn 99.9 %, Pb 99.4 % and Cd 99.8 % in 60 day leaching tests. Meanwhile, PS can significantly increase the proportion of chemically stabilized forms of heavy metals in the solidified body. PS affects on the hydration process of the solidified body. When the mass fraction of PS doping was 30 %, the main hydration products of the solidified body were calcium silicate hydrate (C-S-H) and calcium alumina (AFt). When the mass fraction of PS is 50 %, the main hydration products are calcium aluminosilicate hydrate (C-A-S-H), sodium aluminosilicate hydrate (N-A-S-H), and AFt. These hydration products have good solidification effects on heavy metals. Therefore, it can be concluded that the MSWIFA/PS solidified body is an environmentally friendly and efficient binder.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2024 Elsevier Ltd. All rights reserved.)