Diametric compression of rings to analyze Guadua bamboo creep on the transverse plane.

Guadua angustif olia is a bamboo species that has been used in construction since it is an excellent sustainable material. However, it creeps under sustained loading, modifying the structural behavior of culms and joints. Thus, this study was aimed at describing the creep behavior of Guadua on the transverse plane. To this end, 60 Guadua rings were submitted to a diametric compression load by means of steel blocks, while the diametric displacement was measured over time. In tests conducted for up to 90 days, the displacements did not reach a stationary value. A high degree of deformation over time was measured, which was about 2-3 times that reported for bamboo creep under axial bending. The data were successfully fitted to a generalized Maxwell model and a Burgers model. Model parameters were not significantly different when being fitted at 30, 50, 60, and 90 days, suggesting that parameters of viscoelastic models to represent bamboo creep on the transverse plane can be captured with tests lasting 30 days. Eleven rings failed at a stress level of 3.64 MPa (Coefficient of variation CV = 0.22) and a strain level of 0.0373 (CV = 0.20) which are 39% lower and 78% higher than the failure stress and strain, respectively, obtained in static control tests. The substantial creep on the transverse plane indicates that the stiffness and capacity of some types of bamboo joints may be drastically reduced over time. Fitted parameters may be used in theoretical models to assess the performance of bamboo elements and joints under transverse loading over time.
Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(© 2024 The Authors.)