Highly Deformable High-Strength SiO 2 Aerogel Designed with an Alternating Structure of Hard Cores and Flexible Chains for Thermal Insulation.

Thermally insulating aerogels can now be prepared from ceramics, polymers, carbon, and metals and composites between them. However, it is still a great challenge to make aerogels with high strength and excellent deformability. We propose a design concept of hard cores and flexible chains that alternately construct the aerogel skeleton structure. The approach gives the designed SiO ₂ aerogel excellent compressive (fracture strain 83.32%), tensile. and shear deformabilities, corresponding to maximum strengths of 22.15, 1.18, and 1.45 MPa, respectively. Also, the SiO ₂ aerogel can stably perform 100 load-unload cycles at a 70% large compression strain, demonstrating an excellent resilient compressibility. In addition, the low density of 0.226 g/cm ³ , the high porosity of 88.7%, and the average pore size of 45.36 nm effectively inhibit heat conduction and heat convection, giving the SiO ₂ aerogel outstanding thermal insulation properties [0.02845 W/(m·K) at 25 °C and 0.04895 W/(m·K) at 300 °C], and the large number of hydrophobic groups itself also gives it excellent hydrophobicity and hydrophobic stability (hydrophobic angle of 158.4° and saturated mass moisture absorption rate of about 0.327%). The successful practice of this concept has provided different insights into the preparation of high-strength aerogels with high deformability.