Inorganic Perovskite Quantum Dot-Based Strain Sensors for Data Storage and In-Sensor Computing.

Although remarkable improvement has been achieved in stretchable strain sensors, challenges still exist in aspects including intelligent sensing, simultaneous data processing, and scalable fabrication techniques. In this work, a strain-sensitive device is presented by fabricating a CsPbBr ₃ quantum dots (QDs) floating-gate field-effect transistor (FET) sensing array on thin polyimide (PI) films. The FET exhibits an excellent on/off ratio (>10 ³ ) and a large memory window (>2 V). With the introduction of CsPbBr ₃ QDs as the trapping layer, an additional UV response is obtained because of the photogenerated charge carriers that significantly enhance the source-drain current ( I _DS ) of the device. At each electrical state, the I _DS varies with the strains and the sensing range is from compressive +12.5% to tensile -10.8%. Excellent data retainability and mechanical durability demonstrate the high quality and reliability of the fabricated sensors. Furthermore, synapse functions including long-term potentiation (LTP), long-term depression (LTD), etc., are emulated at the device level. Linearity factor changes of LTP/LTD in different sensing scenarios demonstrate the reliability of the device and further confirm the different sensing mechanisms with/without UV illumination. Our results exhibit the potential of transistor-based devices for multifunctional intelligent sensing.