Influence of thickness and aging on the mechanical properties of provisional resin materials.

This study aimed to evaluate the flexural strength (FS) and modulus of elasticity (ME) of 2 provisional resins at different thicknesses and after different storage periods. A total of 80 specimens were made of 2 provisional restorative materials (n = 40): Dencôr (DC) or Protemp 4 (PT). The specimens in each material group were prepared in 2 different thicknesses (n = 20): 1.5 mm or 2.0 mm. The groups were further subdivided by storage time (n = 10 per material thickness per time): 7 days or 3 months. A 3-point bending test was performed with a universal testing machine. Data were submitted to 3-way analysis of variance followed by a post hoc Tukey test (α = 0.05). Regarding the interaction of material and thickness, the 2.0-mm-thick DC specimens presented a significantly lower mean FS (41.08 MPa) than the other groups (P < 0.05). Regarding the interaction of material and storage time, PT after 3 months presented a significantly higher mean FS (75.51 MPa) than the other groups and periods (P < 0.05). Regardless of the material, the highest mean ME was found in the 1.5-mm-thick group after 3 months (2.24 GPa) (P < 0.05). The lowest ME values were found in the 2.0-mm-thick specimens after both storage times (7 days, 0.88 GPa; 3 months, 1.09 GPa), which were not significantly different from each other (P > 0.05). The correlation between FS and ME was direct and positive (R ² = 0.51; P < 0.001), independently of the variables (material, thickness, and time). Therefore, 2.0-mm-thick PT specimens presented the highest values of FS, mainly after 3 months. The ME was higher after 3 months (1.5-mm-thick specimens), regardless of the material. In addition, the higher the FS, the higher the ME of the material.