Comparison of Jordanian and standard diatomaceous earth as an adsorbent for removal of Sm(III) and Nd(III) from aqueous solution.

In this study, Jordanian diatomaceous earth (JDA) and commercial diatomaceous earth (standard diatomaceous earth, SDA) were used for adsorption of samarium (Sm)(III) and neodymium (Nd)(III) ions from aqueous solutions using batch technique as a function of initial concentration of metal ions, adsorbent dosage, ionic strength, initial pH solution, contact time, and temperature. Both adsorbents were characterized by Fourier transform infrared (FTIR), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller surface area, and cation exchange capacity (CEC). Maximum metal ion uptake was observed after 100 min of agitation, and the uptake has decreased with increasing temperature and reached a maximum at pH ≈ 5. Different types of adsorption isotherms and kinetic models were used to describe the Nd(III) and Sm(III) ion adsorption. The experimental data fitted within the following isotherms in the order Langmuir > Dubinin-Radushkevich (DR) > Freundlich and the pseudo-second-order kinetic model based on their coefficient of determination (R ² ), chi-square (χ ² ), and error function (F _error% ) values. Maximum adsorption uptakes, according to the Langmuir model, were obtained as 188.679 mg/g and 185.185 mg/g for Sm(III) and 169.492 mg/g and 149.254 mg/g for Nd(III) by JDA and SDA, respectively. The results of thermodynamic parameters showed that the adsorption of Sm(III) and Nd(III) ions onto JDA and SDA is a feasible, spontaneous, exothermic, and entropy driven. The best recovery for Sm(III) and Nd(III) was obtained when the 0.05 M EDTA + 0.05 M H ₃ PO ₄ mixture was used as an eluent.