Measurement of self-propulsion distance of wheelchair using cycle computer excluding assistance distance by touch switch: A pilot study.

Objective: Although the propulsion distance of a wheelchair is measured by some devices, measuring self-propulsion distance, excluding assistance propulsion distance by the caregiver, is difficult. This is a pilot study conducted to verify whether the propulsion distance of wheelchair users, excluding the assistance propulsion distance, can be measured using a cycle computer by attaching the touch switch. Methods: The wheelchair propulsion distance was measured using a cycle computer. We connected the touch switch and the cycle computer to the wheelchair to exclude assistance propulsion distance. We set the cycle computer to stop recording while the caregiver was touching the sensor. To confirm the propulsion distance using the cycle computer, the volunteer propelled the wheelchair on a rectangular facility with a total distance of 181 m, and the examiner confirmed the propulsion distance. The validation test to confirm the accuracy of the touch switch attached to the cycle computer was performed on a 50-m straight runway. The volunteer and caregiver propelled the wheelchair alternately by 10 m and continued until 50 m. The examiner confirmed the distance after 50-m propulsion. Results: In the 181-m rectangular facility, the propulsion distance that the volunteer propelled the wheelchair with the cycle computer was 180 m. In the 50-m straight runway, the propulsion distance was 30 m with caregiver assistance for 20 m. Conclusion: The present study showed that our modified device could measure the self-propulsion distance, excluding assistance propulsion distance in wheelchair users.