Physiological function of stentless aortic valves is altered by trimming and removal of aortic wall components.

Various techniques of stentless aortic valve implantation with or without wall components exist. We investigated the in-vitro performance of stentless valves without or with aortic wall removal mimicking root versus subcoronary implantation. Glutaraldehyde-preserved stentless aortic valves (gpSVG), cryo-preserved human homografts (cpHG), cryo-preserved xenografts (cpXG), and fresh xenografts (fXG) were used. Valves were mounted as full roots or trimmed in a mock circuit. Mean transvalvular gradient (MTVG, mmHg) was measured. Distensibility was quantified using post-systolic backflow volume (BV, ml) - after valve closure. Function was visualized by means of a high-speed camera. Glutaraldehyde-preserved valves exhibited higher MTVG than cryo-preserved or fresh substitutes. After trimming, cpHG, cpXG, and fXG demonstrated marked reduction of MTVG (cpHG: 7.6-5.2 mmHg; cpXG: 6.7-4.9 mmHg; fXG: 8.4-5.2 mmHg). In contrast, after trimming gpSVG exhibited a significant increase of MTVG (7.1-9.2 mmHg). BV remained constant. Visualization indicated maintained distension of all valves and types of all sizes after trimming. In fresh and cryo-preserved grafts, aortic wall trimming resulted in significantly improved systolic performance while glutaraldehyde-preserved stentless valves demonstrated systolic impairment after wall resection. Subcoronary implantation of fresh or cryo-preserved aortic valves may therefore be preferred. In contrast, glutaraldehyde-preserved valves are dependent on wall suspension and may therefore be implanted as a root.