Passive and SMA-activated confinement of circular masonry columns with basalt and glass fibers composites.

Fiber Reinforced Polymer (FRP) composites are widely used for strengthening and conservation of historic masonry, even if research problems are still open. The mechanical behavior of masonry columns having a circular cross section, confined with glass and basalt FRP systems was studied in this paper. An extended experimental investigation is presented in order to show the results of axial compression tests on circular masonry columns built with natural blocks (calcareous stone). Active confinement was also studied by using a novel technique that employs Shape Memory Alloys (SMA). Totally twenty-four masonry columns were built, instrumented and tested. Different fibers, strengthening schemes and matrix/adhesive were used for the confinement of the columns. Unstrengthened columns were tested as reference specimens. Axial strain of the columns and tensile strain of the fibers in the direction perpendicular to the primary axis of the columns were measured with the applied load. Experimental results revealed the effectiveness of the FRP-confinement for masonry columns. Active confinement was found to be effective at early loading stages since an increased stiffness of the SMA/GFRP-confined columns was measured. A prediction of the compressive strength was obtained by using the model of the Italian guidelines CNR DT 200 (National Research Council) in order to compare the experimental results with the design approach, also for new types of fiber like basalt which were not included in the technical codes. Finally, the experimental results were compared with theoretical values calculated according with to two existing analytical models in order to test their effectiveness for the analyzed configurations. [ABSTRACT FROM AUTHOR]