FDTD Simulations of Corona Effect on Lightning-Induced Voltages.

In this paper, a simplified model of corona discharge for the finite-difference time-domain (FDTD) computations has been applied to analysis of lightning-induced voltages at different points along a 5-mm radius, 1-km long single overhead wire taking into account corona space charge around the wire. Both perfectly conducting and lossy ground cases were considered. FDTD computations were performed using a 3-D nonuniform grid. The progression of corona streamers from the wire is represented as the radial expansion of cylindrical weakly conducting (40 μS/m) region around the wire. The magnitudes of FDTD-computed lightning-induced voltages in the presence of corona discharge are larger than those computed without considering corona. The observed trend is in agreement with that reported by Nucci et al. and by Dragan et al ., although the increase predicted by our full-wave model (up to 5% and 9% for negative and positive lightning return strokes, respectively) is less significant than in their studies (up to a factor of 2) based on the distributed-circuit model with sources specified using the electromagnetic field theory. The disparity is likely to be related to the use of different charge-voltage diagrams, explicitly assumed by Nucci et al. and Dragan et al . and resulting from our FDTD model with corona in the present study. When corona is considered, there is a tendency for induced-voltage rise time to increase. It appears that the distributed impedance discontinuity, associated with the corona development on the wire, is the primary reason for higher induced-voltage peaks and longer voltage rise times, compared to the case without corona. [ABSTRACT FROM PUBLISHER]