Oxidation of Slurry Aluminide Coatings on Cast Stainless Steel Alloy CF8C-Plus at 800 °C in Water Vapor.

A new, cast austenitic stainless steel, CF8C-Plus (CF8C-P), has been developed for a wide range of high temperature applications, including diesel exhaust components, turbine casings and turbocharger housings. CF8C-P offers significant improvements in creep rupture life and creep rupture strength over standard CF8C steel. However, at higher temperatures and in aggressive environments such as those containing significant water vapor, an oxidation-resistant protective coating will be necessary to extend service life. The oxidation behavior of alloys CF8C and CF8C-P with various aluminide coatings were compared at 800 °C in air plus 10 vol% water vapor. Due to their affordability, slurry aluminides were the primary coating system of interest, although chemical vapor deposition and pack cementation coatings were also compared. Additionally, a preliminary study of the low-cycle fatigue (LCF) behavior of aluminized CF8C-P was conducted at 800 °C. Each type of coating provided substantial improvements in oxidation behavior, with simple slurry aluminides exhibiting very good oxidation resistance after 3,000 h testing in water vapor. Preliminary LCF results indicated that thicker aluminide coatings degraded high temperature fatigue properties of CF8C-P, whereas thinner coatings did not. Results suggest that appropriately designed slurry aluminide coatings are a viable option for economical, long-term oxidation protection of austenitic stainless steels in water vapor. [ABSTRACT FROM AUTHOR]