Plant design aspects of catalytic biosyngas conversion to higher alcohols.

Abstract: Although biomethanol production has attracted most of the attention in the past years, there is a current trend for the synthesis of higher alcohols (i.e. ethanol, plus C3–C4) from biomass gasification. These compounds could be used directly as fuel or fuel additives for octane or cetane number enhancement. These also serve as important intermediates for the chemical industry. In this paper a comparison is performed between the different process configurations a higher alcohols production plant from biomass gasification can take. These options are modelled in Aspenplus™; all steps and important unit operations are presented with the aim to correctly evaluate the peripheral energy requirements and conclude with the overall thermodynamic limitations of the processes. The differentiation between black liquor and solid biomass gasification, the type of catalyst employed, and the effect of the recycling scheme adopted for the reutilization of unreacted syngas are evaluated. The design has to cope with the limited yields and poor selectivity of catalysts developed so far. The gas cleaning is different depending on the different requirements of the catalysts as far as H2S purity. The process modelling results reveal that the hydrogenation of CO to higher alcohols is favoured by high pressure, temperature around 325 °C and high reactor residence times. A biorefinery using modified Fisher–Tropsch (FT) catalysts (MoS2) prevail over modified MeOH catalyst (Cu–Zn based) for HA production. The efficiency of HA production in HHV terms can reach up to 25%. [Copyright &y& Elsevier]