Crack formation in ceramic films used in solid oxide fuel cells.

Abstract: The manufacture of solid oxide fuel cells (SOFCs) involves fabrication of a multilayer ceramic structure, for which constrained sintering is a key processing step in many cases. Defects are often observed in the sintered structure, but their formation during sintering is not well understood. In this work, various ceramic films were fabricated by screen printing and a variety of defects observed. Some films showed “mud-cracking” defects, whereas others presented distributed large pores. “Mud cracking” defects were found to originate from a network of fine cracks present in the green film and formed during drying and binder burn-out. Control of these early stages is essential for producing crack-free films. In order to investigate how defects evolve during sintering, artificial cracks were introduced in the green films using indentation. It was observed that crack opening always increased during constrained sintering. In contrast, similar initial cracks could be closed and healed during co-sintering. [Copyright &y& Elsevier]