Determination of Trace Chlorine in Fine Ceramics by ICP-AES Using Tungsten Boat Furnace Vaporizer and Exchangeable Sample Cuvette System as a Direct Solid Sampler.

A new approach to simple solid sample digestion, subsequent vaporization, and introduction into an inductively coupled plasma was developed for the direct determination of chlorine in fine ceramic materials by atomic emission spectrometry. To each small sample cuvette made of tungsten, a powder sample was placed and weighed accurately. Following an addition of modifier solution, the cuvette was positioned on the tungsten boat furnace incorporated an electrothermal vaporizer. Then, the analyte in the sample cuvette was vaporized and introduced into the plasma; the major components of ceramic being retained. The solid ceramic samples were analyzed by using an external calibration curve prepared with the aqueous standard solutions. The detection limit of chlorine was estimated to be 0.71 ng, which corresponds to 59 ng g−1of the chlorine concentration in solid ceramic materials. The relative standard deviation was calculated to be 3.2%. The analytical results in various ceramic materials are described. [ABSTRACT FROM AUTHOR]