LRFD Calibration for Steel Strip Reinforced Soil Walls.

The paper reports the results of load and resistance factor design (LRFD) calibration for pullout and yield limit states for steel strip reinforced soil walls under self-weight loading. An important feature of the calibration method is the use of bias statistics to account for prediction accuracy of the underlying deterministic models for reinforcement load, pullout capacity and yield strength of the steel strips, and random variability in input parameters. To improve the accuracy of reinforcement load predictions, small adjustments to current semiempirical American Association of State Highway and Transportation Officials (AASHTO) load design charts are proposed. Similarly, current empirical-based design charts found in AASHTO and Federal Highway Administration (FHWA) guidance documents for the estimation of the pullout resistance factor for smooth and ribbed steel strips are adjusted to improve the accuracy of pullout capacity predictions. The results of calibration lead to a load factor of 1.35 that is consistent with current practice and resistance factors that together give a consistent probability of failure of 1% for all three limit states considered. Furthermore, comparison with allowable stress design (ASD) past practice (AASHTO simplified method) shows that the operational factors of safety using a rigorous LRFD approach give the same or higher factors of safety and lower probabilities of failure. In this study, data for steel strip reinforced soil walls are used as an example to illustrate rigorous reliability theory-based LRFD calibration concepts. However, the general approach is applicable to other reinforced soil wall technologies and calibration outcomes can be updated as more data become available. [ABSTRACT FROM AUTHOR]