The influence of substrate absorbency on coating surface chemistry

The composition of the top surface of a coating layer can influence its functional properties or subsequent processing steps. The effect of the substrate absorbency on the coating surface chemistry is reported. Different coating systems containing a kaolin clay pigment, fine or coarse precipitated calcium carbonates, and a common latex binder were examined. The influence of a soluble polymer added into the coating was characterized. The surface chemistry was measured with attenuated total internal reflectance (ATR) and X-ray photoelectron spectroscopy (XPS).Absorbent substrates generate bulky coatings with high voids and low gloss. Rapid dewatering by the absorbent substrate pulls the small particles, like latex binder, away from the top layers causing a low latex concentration at the surface. On non-absorbent substrates, the addition of the soluble polymer generates coating layers with higher void volume, lower gloss, and lower latex concentrations at the coating surface. However, on absorbent substrates, polymer addition causes coatings with lower void volumes and higher gloss. In this case, the rapid dewatering and mobility of particles is reduced by the polymer, which helps to retain the small particles at the surface. As a result, latex concentration at the surface increases with polymer addition on absorbent substrates. [Copyright &y& Elsevier]