Effects of TiN coating on the corrosion of nanostructured Ti–30Ta–xZr alloys for dental implants

Abstract: Electrochemical characteristics of a titanium nitride (TiN)-coated/nanotube-formed Ti–Ta–Zr alloy for biomaterials have been researched by using the magnetic sputter and electrochemical methods. Ti–30Ta–xZr (x =3, 7 and 15wt%) alloys were prepared by arc melting and heat treated for 24h at 1000°C in an argon atmosphere and then water quenching. The formation of oxide nanotubes was achieved by anodizing a Ti–30Ta–xZr alloy in H3PO4 electrolytes containing small amounts of fluoride ions at room temperature. Anodization was carried out using a scanning potentiostat, and all experiments were conducted at room temperature. The microstructure and morphology of nanotube arrays were characterized by optical microscopy (OM), field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The TiN coatings were obtained by the radio-frequency (RF) magnetron sputtering technique. The depositions were performed from pure Ti targets on Ti–30Ta–xZr alloys substrates. The corrosion properties of the specimens were examined using potentiodynamic test in a 0.9% NaCl solution by using potentiostat. The microstructures of Ti–30Ta–xZr alloys were changed from an equiaxed to a needle-like structure with increasing Zr content. The interspace between the nanotubes was approximately 20, 80 and 200nm for Zr contents of 3, 7 and 15wt%, respectively. The corrosion resistance of the TiN-coated on the anodized Ti–30Ta–xZr alloys was higher than that of the untreated Ti alloys, indicating a better protective effect. [Copyright &y& Elsevier]