Ballistic Limit of Single and Layered Aluminium Plates.

This paper presents an experimental and finite-element investigation of ballistic limit of thin single and layered aluminium target plates. Blunt-, ogive- and hemispherical-nosed steel projectiles of 19 mm diameter were impacted on single and layered aluminium target plates of thicknesses 0.5, 0.71, 1.0, 1.5, 2.0, 2.5 and 3 mm with the help of a pressure gun to obtain the ballistic limit in each case. The ballistic limit of target plate was found to be considerably affected by the projectile nose shape. Thin monolithic target plates as well as layered in-contact plates offered lowest ballistic resistance against the impact of ogive-nosed projectiles. Thicker monolithic plates on the other hand, offered lowest resistance against the impact of blunt-nosed projectiles. The ballistic resistance of the layered targets decreased with increase in the number of layers for constant overall target thickness. Axi-symmetric numerical simulations were performed with ABAQUS/Explicit to compare the numerical predictions with experiments. 3D numerical simulations were also performed for single plate of 1.0 mm thickness and two layered plate of 0.5 mm thickness impacted by blunt-, ogive- and hemispherical-nosed projectiles. Good agreement was found between the numerical simulations and experiments. 3D numerical simulations accurately predicted the failure mode of target plates. [ABSTRACT FROM AUTHOR]