Hydrogen sulphide removal from landfill gas.

Control of odours should be considered to be a fundamental issue in order to site, design and manage sanitary land-fills. With regard to construction and demolition (C&D) debris, landfilling was the mainly adopted solution in many European Countries; in particular, gypsum drywalls can produce high concentrations of hydrogen sulphide (H2S) in landfill gas ranging from 7 ppm to 100 ppm. In some cases also dangerous concentrations until to 12,000 ppm were detected. In this paper H2S removal efficiency in a lab-scale vertical packed scrubber was investigated. Hydrogen sulphide abatement was evaluated for inlet H2S concentrations of 1000-100-10 ppm, adjusting scrubbing liquid pH in the range 9-12.5 by means of caustic soda (NaOH 2N solution). Moreover, best operating conditions for the system were defined as well as H2S abatement along the tower and liquid recirculation effectiveness in case of inlet H2S concentration of 10 ppm (typical odour concentration). Results showed that pH of 11.5 in scrubbing liquid could be considered the best value for removal of different inlet H2S concentrations, also taking into account parasitical consumption of NaOH due to CO2 absorption. Moreover, in case of continuous working of the system at H2S concentration of 10 ppm, strong removal efficiency was already obtained with a packed bed height of about 70 cm. Significant performances were ensured after 1h of constant activity, consuming about 3 ml of soda per cubic meter of polluted air. Subsequently liquid blowdown was necessary. [ABSTRACT FROM AUTHOR]