Power generation confirmation of induction motors and influence on islanding detection devices.

Photovoltaic generation systems must have protection devices and islanding detection devices if they are connected to utility lines of the electric power company. This is regulated in national technological requirement guidelines and the electric equipment technology standards. Islanding detection devices are installed to detect blackouts due to events such as ground faults and short circuits in utility lines. When an islanding detection device detects a power blackout, the photovoltaic generation system must be stopped immediately. It is known that islanding detection devices cannot detect islanding if induction motors are present among the loads. We investigated the influence of induction motors on islanding detection devices and found that when the frequency decreases after a utility line failure, induction motors change over to generator mode, thus compensating the active power imbalance and suppressing voltage variation. In addition, if the postfault frequency is adjusted by PLL control so as to maintain a fixed power factor, induction motors suppress this frequency change, thus extending islanding operation. It is clear from the above results that induction motors are more likely to produce islanding phenomena than static loads. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(4): 8–18, 2010; Published online in Wiley InterScience (<URL>www.interscience.wiley.com</URL>). DOI 10.1002/eej.20962 [ABSTRACT FROM AUTHOR]