Suitability of three different two-equation turbulence models in predicting film cooling performance over a rotating blade

Abstract: The suitability of three different two-equation turbulence models in predicting film cooling effectiveness on a rotating blade was investigated and they are the commonly used standard k-ε model, the k-ω model and the shear stress transport k-ω model. To fulfill this target, both numerical simulation and the experimental investigation were carried out for a rotating blade having a flat test surface with a 4mm diameter straight circular cooling hole in 30° inclined injection. The blade rotated at five different speeds of 0, 300, 500, 800 and 1000rpm. The momentum ratio was set to be 0.285 and the Reynolds (Re D) number based on the mainstream velocity and hydraulic diameter of the mainstream channel is 1.45×105. The averaged density ratio was chosen to be 1.026 with air as both the coolant and the mainstream. Comparison between the numerical work and the experimental results indicated that (1) the rotating speed is the most critical parameter influencing the film cooling effectiveness distributions and the pressure surface could be remarkably different from the suction surface, (2) as for the algebraic averaged film cooling effectiveness, numerical predictions of the three turbulence models all overshoot compared with the experimental results, (3) among the three turbulence models, the standard k-ε model gave the poorest prediction. [Copyright &y& Elsevier]