Reuse of printing and dyeing wastewater in processess assessed by pilot-scale test using combined biological process and sub-filter technology

Abstract: In this work, a pilot-scale (300m3/d) wastewater reclamation system was tested for printing and dyeing wastewater treatment from a textile factory. The wastewater was first hydrolyzed under anoxic condition, and then was treated under aerobic condition. Biologically treated wastewater was filtered by sub-filter technology (Patent: CN1308024A). The results showed that the average concentration of CODcr, color and turbidity in the effluent were less than 50mg/L, 10 times and 2NTU, respectively. The average CODcr, color and turbidity removal efficiencies were 91%, 92.5% and 90.9%, respectively. The treated effluent quality satisfied the requirement of water quality for printing and dyeing process. The most attracting part of the work was its extremely low color, low turbidity, low concentration of Fe and Mn, which was always demanded in textile sectors for an improved finish and better quality dyeing. [Copyright &y& Elsevier]