Characterization and flocculating properties of an extracellular biopolymer produced from a Bacillus subtilis DYU1 isolate

Abstract: Biopolymer DYU500 produced from Bacillus subtilis DYU1 was found to have excellent flocculating ability. With the addition of 40mg-DYU500/L and 50mM CaCO3, the optimum temperature for flocculation performance of DYU500 was 30°C, giving the highest flocculating activity and rate of 13.5 and 97%, respectively. Analysis with Fourier transform infrared spectrophotometry (FT-IR), nuclear magnetic resonance spectrometry (NMR) and amino acid identification shows that the DYU500 biopolymer mainly possesses the structure of poly-glutamic acid (PGA). The average molecular weight of DYU500 was about (3.16–3.20)×106 Da as determined by gel permeation chromatography. The major components of biopolymer DYU500 were total sugars, uronic acids, proteins and polyamides (homopolymer of glutamic acid), accounting for a weight ratio of approximate 14.9, 2.7, 4.4 and 48.7% (w/w), respectively. The flocculating activity of DYU500 in the kaolin suspension was markedly stimulated by the addition of bivalent cations Ca2+ or Mg2+ in optimum concentration ranges of about 0.15–0.90 and 0.10–0.90mM, respectively. The synergistic effect of cations was most effective at a weak acidic or neutral pH (6.0–7.0). The flocculating activity of DYU500 linearly decreased with an increase in incubation temperature and the activity was completely lost when heating upon 120°C, arising from the destruction of the polyamides structure of DYU500. Moreover, mechanisms describing the flocculation process with DYU500 were proposed based on the experimental observations. [Copyright &y& Elsevier]