A COMPARISON OF SINGLE-CELL AND MULTICELL CULVERTS FOR STREAM CROSSINGS.

Single-barrel culverts are a common means of roadway crossings for smaller streams. While this culvert design provides an economical solution for a crossing, the adverse effects of conveying the stream through a single opening can be far reaching. The single-barrel culvert is typically sized for a design storm much greater than the channel forming discharge. This oversizing causes an interruption of the normal flow patterns and sediment transport for the system. Shallow depths at low flow in the pipe and perching at the outlet can impede fish passage. Multicell culverts (where the main culvert at the channel invert is sized for bankfull discharge, and additional pipes are placed at the floodplain elevation to convey overbank flow up to the design discharge) have been recommended as a best management practice to minimize erosion and improve fish passage. This flume study scaled a prototype single-barrel culvert to both a single-cell model, and a multicell design to compare outlet scour and flow depths within the culvert. The results provide designers and planners with evidence of the benefits of multicell culverts to justify the higher cost of installation compared to single-barrel culverts. [ABSTRACT FROM AUTHOR]