Experimental investigation of the failure behavior of notched wall-thinned pipes

Abstract: The present study performed full-scale pipe tests using 100A Schedule 80 pipe specimens with simulated notched and circular wall thinning to investigate the failure behavior of notched wall-thinned pipes. The tests were conducted under both monotonic and cyclic bending moments at a constant internal pressure of 10MPa at room temperature. The failure pattern, load carrying capacity, deformation ability, and fatigue strength of the notched wall-thinned pipes were evaluated by comparing results to those of circular wall-thinned pipes. The investigation showed that the effect of the type of thinning on the failure behavior was more sensitive under cyclic loading conditions than under monotonic loading conditions. The load carrying capacity of pipes with notched wall thinning was approximately the same or slightly less than that of pipes with circular wall thinning when the thinning area was subjected to tensile stress. However, when the thinning area was subjected to compressive stress, the load carrying capacity of pipes with notched wall thinning was greater than that of pipes containing circular wall thinning. The deformation ability and fatigue strength increased proportionally with the axial length of the thinning defect, and thus these properties were significantly reduced in notched wall-thinned pipes. [Copyright &y& Elsevier]