Lamb mode conversion at edges. A hybrid boundary element–finite-element solution.

Two general and flexible numerical techniques based on the finite-element and boundary element methods developed by the authors in a previous paper are applied to study Lamb wave propagation in multilayered plates and Lamb mode conversion at free edges for frequencies beyond the first cutoff frequency. Both techniques are supported by a meshing criterion which guarantees the accuracy of the results when a condition is fulfilled. A finite-element formulation is directly applicable to study Lamb wave propagation and reflection by simple obstacles such as a flat edge. In order to tackle Lamb wave diffraction problems by defects with more complex geometries, a hybrid boundary element–finite-element formulation is used. This technique provides a major improvement with respect to the only previous boundary element application on Lamb waves: the connecting boundary might be placed as close to the reflector as desired, reducing greatly the requirement on mesh size. Two main application problems on practical metallic plates are studied and compared with reported numerical, theoretical, and experimental results: (1) Lamb wave propagation in degraded titanium diffusion bonds, and (2) Lamb mode conversion at inclined or perpendicular free edges of steel plates for frequencies beyond the first cutoff frequency. © 2005 Acoustical Society of America. [ABSTRACT FROM AUTHOR]