Two possible pathways for the release of arsenic during pyrolysis of chromated copper arsenate (CCA)-treated wood

The behavior of arsenic during pyrolysis at temperatures between 135 and 500 °C has been widely studied. We examined the release of arsenic during the pyrolysis of chromated copper arsenate (CCA)-treated wood, and here we propose two models for the volatilization of arsenic: (a) a reacted arsenic compound, chromium arsenate, in CCA-treated wood was initially decomposed to arsenic pentoxide, which then appeared to be released at around 400–500 °C as a form of arsenic trioxide; and (b) an unreacted arsenic compound, arsenic pentoxide, in CCA-treated wood was released at much lower temperatures than reacted arsenic compound, as a form of arsenic trioxide. In order to restrain the release of arsenic during pyrolysis, it is possible to pyrolyze CCA-treated wood carefully at temperatures around 300–350 °C only if the wood contains little unreacted arsenic compound. Under these conditions, almost all toxic elements remain in the pyrolysis residue, and a weight reduction of the wood of approximately 50% can be obtained. On the other hand, the release of arsenic can be achieved easily using an unreacted arsenic compound under the same pyrolysis conditions. However, in the present study it was difficult to determine the accurate release point of arsenic in both cases due to the level of experimental uncertainty. [Copyright &y& Elsevier]