P-functionalization of Ni Fe − Electrocatalysts from Prussian blue analogue for enhanced anode in anion exchange membrane water electrolysers.

[Display omitted] • Prussian Blue Analogue-derived NiFe-based electrocatalysts. • High catalytic activity towards oxygen evolution in an alkaline environment. • P-doping strategy for enhancing oxygen evolution activity and stability. • Application as anion exchange membrane water electrolyzer (AEMWE) anodes. • High current density and durability outperforming the benchmark. Efficient hydrogen generation from water-splitting is widely acknowledged as a priority route to promote the hydrogen economy. Anion exchange membrane water electrolyzers (AEMWE) offer multiple advantages in improving performance and minimizing the cost limitations of current electrolysis technologies. However, the persistence of issues related to the limited electrocatalytic activity of such materials and their poor stability under operating conditions makes developing highly active, stable, platinum-group-metal-free electrocatalysts for oxygen evolution reaction (OER) necessary. We report the development of Prussian blue analogues (PBA)-derived NiFe-based electrocatalysts through a mild aqueous phase precipitation method, followed by thermal stabilization and phosphorus doping. The formation of the NiFe-PBA-precursor with a framework nanocubic Ni(II)[Fe(III)(CN) 6 ] 2/3 structure was confirmed by X-ray diffraction, scanning electron microscopy, and inductively coupled plasma analysis. The NiFe-PBA-precursor was subjected to thermal stabilization and phosphorus doping to provide the material with enhanced OER catalytic activity and stability. The existence of OER active sites based on NiFe and NiFeP has been revealed by transmission electron microscopy, X-ray photoelectron spectroscopy, and electrochemical characterization in a three-electrode cell configuration in a 1 M KOH electrolyte. NiFe-PBA and NiFeP-PBA were assembled at the anode side of an AEMWE, resulting in an excellent electrochemical performance both in terms of current density at 2.0 V using 1 M KOH (1.21 A cm−2) and durability, outperforming the benchmark catalyst. [ABSTRACT FROM AUTHOR]