A cGAN-based fatigue life prediction of 316 austenitic stainless steel in high-temperature and high-pressure water environments.

• A fatigue life prediction model based on cGAN has been developed. • Strain amplitude, strain rate, temperature, dissolved oxygen levels, and stacking fault energy are considered as conditions. • The prediction error of fatigue life has been reduced from five times to not higher than triple. • Probabilistic estimation of environmental fatigue life has been achieved. The thermo-mechanical-chemical coupling effect presents significant challenges in accurately predicting the fatigue life of 316 austenitic stainless steel in high-temperature and high-pressure water environments (referred to hereafter as environmental fatigue). The complexity of environmental fatigue experiments results in limited and dispersed data, further making the life prediction difficult. Traditional fatigue life prediction models are often constrained by specific loading conditions and do not adequately account for the complex environmental influences. To address these issues, this paper proposes a novel environmental fatigue life prediction model of 316 stainless steel utilizing conditional Generative Adversarial Networks. The proposed model incorporates critical environmental factors, loading conditions and stacking fault energy, allowing direct prediction of environmental fatigue life. A comparative analysis on the predicted and experimental results reveals that the cGAN-based model significantly improves the prediction accuracy, reducing the fatigue life prediction error from a factor of 5 to within 3. To quantify the uncertainty in fatigue life prediction, the Monte Carlo Dropout method is employed to enable a probabilistic assessment of fatigue life. Furthermore, four environmental and loading conditions are established to evaluate the model's extrapolation capability. The results demonstrate that the probabilistic fatigue assessment effectively captures data distribution and achieves high prediction accuracy. [ABSTRACT FROM AUTHOR]