Analysis, Design, and Optimization of Segment‐Compensated PCB Coil for Multirelay Wireless Power Transfer System.

ABSTRACT This paper proposed a segment‐compensated printed circuit board (PCB) coil for multirelay wireless power transfer (WPT) system. The PCB coil is designed with variable width to improve the system transfer efficiency, and the segmented compensation method is applied to avoid the high voltage stress on resonant capacitors in case of the multirelay WPT system with a low load resistance operating at a constant voltage frequency. The segmented compensation capacitors are integrated into the PCB coil, so as to constitute the compact coupler used in multirelay WPT system. The optimization procedure of the segment‐compensated PCB coil is also provided. The quality factor of the PCB coil can be improved by optimizing the proportional coefficients of width variation. The voltage of capacitors can be reduced by optimizing the number of segments. A physical variable‐width PCB coil with 3 segments is constructed. The experimental prototypes of the three‐coil, four‐coil, and five‐coil WPT systems are built. The experimental results show that the voltage of the segmented compensation capacitors on each coil is almost uniformly distributed and does not exceed 250 V when the input voltage is 50 V and the load resistance is 10 Ω. Compared with the multirelay WPT system using the equal‐width PCB coil, the multirelay WPT system using the PCB coil designed in this paper has higher output power and higher efficiency. [ABSTRACT FROM AUTHOR]