Surface Modification of Self-Adhesive Straw-Based Fiberboard via Alkali Treatment Combined with DES.

Self adhesion is a simple and effective bonding technique that can be used to produce environmentally friendly and green straw-based fiberboard (CLS) through deep eutectic-like solvent (DES) treatment. This article mainly introduces the use of DES composed of choline chloride and oxalic acid. DES is diluted with deionized water and straw is immersed in it, and finally dried into pretreated fiber raw materials. Fiber boards are prepared by adjusting the hot pressing parameters and the preset moisture content of straw itself for hot pressing solidification. The aim of this study was to investigate the effects of different processing parameters (hot pressing temperature and straw moisture content) on the microstructure, physical properties, and mechanical properties of CLS. Straw-based fiberboard heated at 180 ° C exhibited the best mechanical and water resistance performance. The fiberboard reached its highest mechanical performance at a moisture content of 50%. The bending performance of fiberboard produced at 180 °C reached 13.5 MPa, and compared with the board manufactured at 120 °C, the bending strength, tensile strength, and internal bonding strength increased by 320%, 224%, and 280%, respectively. [ABSTRACT FROM AUTHOR]