Hyperbolic load–displacement analysis of helical and expanded piles: database approach.

Recent years have witnessed a focus on improving geotechnical systems by implementing and constructing new deep foundations such as helical and expanded piles. In this study, the effects of parameters such as embedment depth, pile geometry and axial loading direction on the load–displacement behaviour of these piles were examined. To this end, a database was compiled consisting of 80 axial loading test records for different piles. The embedment depth of the piles was in the range 2.4–36.8 m and the diameter of the helices (DH) or expanded parts (DEP) was in the range 254–1500 mm. The ultimate load of the piles was determined using the 2.5% and 5% displacement ratio criteria and the Brinch Hansen 80% method. Hyperbolic functions were fitted to the load–displacement curves, allowing for consistent estimation of the limit load and the initial tangent modulus. Analysis of the results from the database revealed that the dominant factors influencing the ultimate load, limit load, maximum measured load, initial stiffness and load–displacement behaviour were the ratio of DH or DEP to the shaft diameter, the shaft area and the toe area, and the load direction. Correlations derived from the database were validated using measurements from eight full-scale helical and expanded piles. [ABSTRACT FROM AUTHOR]