Determining storage for pressure‐sensitive tape evidence: A long‐term study.

Tape is a type of trace evidence commonly seen in forensic science. Little to no research has been published regarding the optimal storage material for pressure‐sensitive adhesive (PSA) tape. The purpose of this project was to determine the substrate with the least amount of interference for storing PSA tape. Interferences such as difficulty removing tape from the substrate or substrate components leaching into the adhesive can affect the analysis. This was a long‐term study in which samples were stored on various substrates for nearly 10 years. Ten different tape samples were placed on eight different substrates for a total of 80 samples. The substrates included typical materials currently used for tape storage as well as other, less common materials. The tape samples were evaluated for ease of removal at various time intervals. The adhesives from each tape were analyzed at similar time intervals by Fourier transform infrared spectroscopy (FTIR). In addition, the adhesives were analyzed by pyrolysis gas chromatography–mass spectrometry (PyGC‐MS), scanning electron microscopy with energy‐dispersive spectroscopy (SEM‐EDS), and x‐ray fluorescence (XRF) at the last time interval (112 months) and compared to the adhesive tape samples from the original rolls of tape to determine if there was any adverse effect from the substrates during storage. The FedEx backing was the only substrate that had no adverse effects regarding ease of removal. The substrates that had the least effect on the adhesive for both short‐term and long‐term storage included FedEx backings, adhesive sheet backings, and polyester transparency sheets. [ABSTRACT FROM AUTHOR]