Decentralized approach for incorporating waste wind turbine blades into 3D printing filaments using mechanical recycling.

Highlights The increasing awareness in environmental safety has led to rapid development in production of electricity using wind energy with wind turbines. The widespread deployment of wind turbines has outpaced the effective recycling of End‐of‐Life wind turbines. This study explores the potential of mechanically recycling decommissioned wind turbine blades (WTB) as reinforcement material in 3D printing processes. Utilizing mechanical grinding, materials were extracted from the waste blades and subsequently analyzed using Fourier transform infrared spectroscopy, Differential scanning calorimetry, and thermogravimetric analysis to determine optimal processing conditions. The reclaimed materials were then blended with recycled polypropylene through single‐screw extrusion to fabricate tensile test samples via Fused Deposition Modeling. The impact of print orientation on mechanical strength was examined at 0°, 45°, and 90° angles. Morphological analysis was conducted on the fractured specimens to assess the failure characteristics. The findings indicate that samples printed at a 90° orientation exhibited superior mechanical properties, suggesting a viable pathway for incorporating wind turbine waste into sustainable manufacturing cycles. A decentralized‐mechanical recycling technique to the waste WTB. The necessary material parameters for the operations employed in this study. Reinforced 3D printable filaments from waste WTB. Stronger reinforced filaments obtained from proper fiber alignment. [ABSTRACT FROM AUTHOR]