Behavior of Retained Austenite and Carbide Phases in AISI 440C Martensitic Stainless Steel under Cavitation.

In this work emphasis was given to determine the evolution of the retained austenite phase fraction via X-ray diffractometry technique in the as-hardened AISI 440C martensitic stainless steel surface subjected to cavitation for increasing test times. Scanning electron microscopy results confirmed the preferential carbide phase removal along the prior/parent austenite grain boundaries for the first cavitation test times on the polished sample surface during the incubation period. Results suggest that the strain-induced martensitic transformation of the retained austenite would be assisted by the elastic deformation and intermittent relaxation action of the harder martensitic matrix on the austenite crystals through the interfaces between both phases. In addition, an estimation of the stacking fault energy value on the order of 15 mJ m−2 for the retained austenite phase made it possible to infer that mechanical twinning and strain-induced martensite formation mechanisms could be effectively presented in the studied case. Finally, incubation period, maximum erosion rate, and erosion resistance on the order of 7.0 h, 0.30 mg h−1, and 4.8 h μm−1, respectively, were determined for the as-hardened AISI 440C MSS samples investigated here. [ABSTRACT FROM AUTHOR]