Effect of Chlorine Salt Content on the Microstructural Development of C-S-H Gels and Ca(OH) 2 at Different Curing Temperatures.

Freshwater resources are scarce in coastal areas, and using seawater as mixing water can alleviate the scarcity of freshwater resources. However, the presence of chloride ions in seawater affects the generation of hydration products and the durability of concrete structures. In order to investigate the effect of hydrated calcium silicate (C-S-H) gel and calcium hydroxide (CH) generation in seawater-mixed cement pastes under 50 °C curing, their microscopic morphology was investigated using differential scanning calorimetry analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The relationship between the amount of C-S-H gel and CH production and the amount of chloride ion dosing, fly ash dosing, and the age of curing were investigated. The degree of influence between hydration products and influencing factors was analyzed using the grey correlation analysis. It was shown that 50 °C curing promoted the hydration reaction and generated more hydration products compared with ASTM standard. The content of C-S-H gel and CH increased with chloride dosage. The content of C-S-H gel increased by 13.5% under 50 °C curing compared with the control group at a chloride dosage of 1.3%. Fly ash is rich in active SiO2 and AI2O3, and other components, which can react with Ca(OH)2 generated by cement hydration and then generate C-S-H gel. With the increase of fly ash, the content of C-S-H gel also increases, but the CH content decreases. When 25% of fly ash was doped under 50 °C curing, the C-S-H gel content increased by 5.02% compared to the control group. The CH content decreased by 31.8% compared to the control group. With the growth of the maintenance age, the hydration reaction continues, the generation of C-S-H gel and CH will continue to increase, and their microstructures will become denser. C-S-H gel and CH content increased the most by raising the curing temperature at 7 days of curing, increasing by 10.11% and 22.62%, respectively. C-S-H gel and CH content had the highest gray relation with fly ash dosing. Chloride dosage and age of maintenance had the highest correlation with CH content at room temperature maintenance of 0.788 and 0.753, respectively. [ABSTRACT FROM AUTHOR]