Reducing the contour error of leading and trailing edge through feedrate scheduling in 5-axis machining of blisk.

The blisks are complex thin-walled parts with specific structures that have narrow channels and a large degree of bowed-twisted blades. These parts are typically machined using 5-axis machining. However, conventional feedrate scheduling of the tool tip can cause flutter and reduced machining accuracy when dealing with very small radii of curvature and dramatic changes in the tool axis vector. This is because there is a significant difference in moving speed between the tool tip and cutting contact points. To address this issue, we establish an optimization model for feedrate under constraints such as process-allowed cutting speed and machine tool drive along the toolpath. For sections of short toolpaths in the regions of leading and trailing edges with drastic changes in curvature and tool orientations, we schedule a constant feedrate for the tool contact point. For other sections of the toolpath, we construct time-optimal acceleration and deceleration velocity curves using parallel computing technology, ensuring no abrupt changes in acceleration or acceleration velocity at boundary points. Additionally, we smooth the feedrate profile curves for the entire toolpath using the parallel bidirectional scanning method. This approach improves both the efficiency of feedrate scheduling and cutting stability within the regions corresponding to the leading and trailing edges of blisks. [ABSTRACT FROM AUTHOR]