Facile route for processing natural polymers for the formulation of new low-cost hydrophobic protective hybrid coatings for carbon steel in petroleum industry.

This research helps with the creation, assessment, and characterization of a new hybrid protective coating for carbon steel alloy in acid conditions. The findings of this study will be useful for both chemical and petrochemical companies as well as scientists. This study aims to protect C-steel in acid pickling solution 1.0M HCl and formulate new hydrophobic protective hybrid organic–inorganic coatings from biopolymers chitosan and plant resin guar gum. Eight coating samples of chitosan in the absence and the presence of guar gum, silica and two heterocyclic compounds are prepared at feasible operational conditions using hot melt method. The aiding additives improved compatibility between coating constituents as confirmed by using different methods of analysis. This new processing approach has addressed the problems of using chitosan in corrosion control such as solubility in acid media and low mechanical strength. Coating samples of chitosan and its composites with the heterocyclic compounds (2-Hydrazinyl-6-methyl-4, 5-dihydro pyrimidine-4-on) or (2-Hydrazinyl-6-phenyl-4, 5-dihydro pyrimidine-4-on) are potent biocides. Coating shifts corrosion potential of carbon steel by 30 mV to more noble direction relative to the active potential 520 mV of bare carbon steel surface. Impedance and polarization measurements indicate that coating samples protect metal surface as mixed-type inhibitor by adsorption mechanism. There is a good agreement between percentages protection %P of coating calculated using the values of charge transfer resistance, Rct, and corrosion current density, icorr. All %P values are above 99% for all coating samples. Guar gum plant resin increases gloss of the coating film. Silica fills the pores in the polymeric film and increases the stuffiness of the polymeric coating film by modifying the particle size. All coated samples have high contact angle ranging from 150° to 165° indicating low wettability and high hydrophobicity of coating film on the metal surface. [ABSTRACT FROM AUTHOR]