Preparation of solid alkali activator for geopolymer synthesis using vanadium-bearing shale tailing.

The vanadium-bearing shale tailing (VST) with large reserves pollutes the environment and urgently needs to be utilized as a resource. Due to its main component being silica, VST has great potential as a raw material for geopolymer. Therefore, this study uses VST to prepare the solid alkali activator (SAA) by thermochemical methods. Analysis show that the temperature and NaOH dosage of thermochemical reaction significantly affect the alkaline activation effect of SAA. Temperature affects the silicate content and the amount of NaOH affects the soluble silicate content in SAA. When the reaction temperature is high (such as above 900 ℃) and the amount of sodium hydroxide is low (such as the mass ratio of sodium hydroxide to VST is 0.6), quartz almost transforms into silicates, but the silicates have a stable cyclic chemical structure and are difficult to dissolve during the geopolymerization reaction. When the reaction temperature is low (such as less than 700 ℃) and the amount of sodium hydroxide is high (such as the mass ratio of sodium hydroxide to VST is 0.9), quartz in VST is difficult to fully convert into silicates, there are unreacted quartz and sodium hydroxide in SAA, and SAA has poor alkaline activation performance. The optimal synthesis process conditions for SAA are as follows: synthesis temperature is 900 °C and the mass ratio of sodium hydroxide to VST is 0.95. The main silicate components of SAA are Na 2 SiO 3 and Na 15.6 Ca 3.8 Si 12 O 36. During the synthesis of one-part geopolymer (OPG), Na 2 SiO 3 dissolution generates a strong alkaline reaction environment and provides active silicon-oxygen tetrahedron monomers or oligomers, Na 15.6 Ca 3.8 Si 12 O 36 is bonded with geopolymer gel structure by stable cyclic silicate structure, which makes OPG have a compact integrated structure. When the mass ratio of SAA to MK is 1:1.3, the 7-day compressive strength of the prepared OPG is about 49 MPa, SAA has the potential as a substitute for commercial sodium silicate to prepare geopolymers. [Display omitted] • Clarifying that reaction temperature and alkali dosage significantly affect the performance of solid alkali activator. • Using vanadium-bearing shale tailing to synthesize solid alkali activator with excellent performance. • Revealing that the stable cyclic silicate structure is directly involved in the formation of geopolymer gel structure. [ABSTRACT FROM AUTHOR]