Design and Parameter Optimization of a Combined Rotor and Lining Plate Crushing Organic Fertilizer Spreader.

To address the inefficient crushing of fertilizer during the mechanized spreading process caused by the caking of high-humidity organic fertilizer, a fertilizer spreader with a combined rotor and lining plate crushing mechanism was proposed in this paper. With the introduction of the basic structure and working principle of the spreader, a particle group model for an organic fertilizer consisting of both caked and bulk fertilizer was built, based on the Hertz–Mindlin model with bonding and the Hertz–Mindlin model with JKR contact, in EDEM to construct an organic fertilizer-crushing-and-spreading model. With the rotor speed, the axial distance of the hammer, and the number of circumferential hammer groups as the experimental factors and the maximum broken bond rate of the caked organic fertilizer and the minimum coefficient of variation of spreading uniformity as the experimental indices, the Box–Behnken test method was employed to establish regression equations for response surface analysis and multi-objective optimization of the test results. The results indicated that, when the rotor speed was 6.47 Hz, the axial distance of the hammer was 90.30 mm, the number of circumferential hammer groups was five, the broken bond rate reached 90.86%, and the coefficient of variation was 21.45%. Verification tests under these conditions showed a broken bond rate of 90.03% and a coefficient of variation of 22.12%, which were consistent with the optimization results. Therefore, our research provides a reference for the structural design of an organic fertilizer spreader and the optimization of its working parameters. [ABSTRACT FROM AUTHOR]