Linear stability analysis of compressible boundary layer over an insulated wall using compound matrix method: Existence of multiple unstable modes for Mach number beyond 3.

The linear spatial stability of a parallel two-dimensional (2D) compressible boundary layer on an adiabatic plate is investigated by considering both 2D and three-dimensional (3D) disturbances. The compound matrix method is employed here, for the first time, for compressible flows, which, unlike other conventional techniques, can efficiently eliminate the stiffness of the equations governing the spectral amplitudes. The method is first validated with published results in the literature corresponding to spatial and temporal instability of flows ranging from low subsonic to high supersonic Mach numbers (M), which shows a good match depending upon the proper choice of free-stream temperature and the wall dispersion relation. Subsequently, flow compressibility effects and the spanwise variation of disturbances are also investigated for M ranging from low subsonic to high supersonic cases (from M = 0.1 to 6). Mack (AGARD Report No. 709, 1984) reported the existence of two unstable modes for M > 3 from viscous calculations (the so-called "second mode") that subsequently fuse to create only one unstable zone when M increases. Our calculations show a series of higher-order unstable modes for M > 3 in addition to the findings of Ma and Zhong ["Receptivity of a supersonic boundary layer over a flat plate. Part 1. Wave structures and interactions," J. Fluid Mech. 488, 31–78 (2003)], where such higher-order modes for supersonic boundary layers are all noted to be spatially stable. The number and the frequency extent of the corresponding unstable zones increase with an increase in M beyond 3 while propagating downstream at a higher speed than those corresponding to incompressible, subsonic, and low supersonic (M < 2) cases. [ABSTRACT FROM AUTHOR]