Exploring the Use of Orientation-Independent Inelastic Spectral Displacements in the Seismic Assessment of Bridges.

Seismic intensity measures (IMs) provide a link between the seismic hazard and the dynamic response of structures subjected to earthquake shaking. The spectral acceleration at the first and usually dominant vibration mode, Sa(T1), is a popular choice for building structures. Meanwhile, the IM selection for bridges is non-trivial since they do not typically possess a single dominant mode. Even for ordinary bridges with a dominant mode, the behavior can change significantly in each principal direction through the activation, or yielding, of its different components. This study examines the performance of a novel IM that incorporates ground motion directionality and structure non-linearity in this context: the nnth percentile of all rotation angles of the inelastic spectral displacement, Sdi,RotDnn. This evaluation is carried out within the context of an ordinary bridge structure and is compared with other conventional IMs used in regional risk assessment of bridges. The case study bridge utilized is a highway overcrossing located in California with two spans and a continuous prestressed reinforced concrete box girder deck section. A large ground motion set was selected from the NGA-West2 database, and incremental dynamic analysis was carried out on the structure to assess the IM performance to characterize collapse. The results indicate that Sdi,RotDnn performs very well compared to other IMs for the bridge structure and could be a prudent choice to characterize inelastic response of bridges with several possible mechanisms in different principal directions. Also, using the RotD50 definition, typically used in ground motion models, showed a 17.3% increase in efficiency compared to RotD100 definition typically used in engineering practice. [ABSTRACT FROM AUTHOR]