Efficiency of shear connectors under combined shear and torsion.

AbstractThe connection of steel elements to concrete is typically achieved through embedded shear connectors (anchors) placed at the interface of concrete and steel. These shear connectors come in various types, such as headed studs, welded or coupled rebars, shear lugs, or a combination of these, designed to handle large shear forces. Shear connectors primarily resist shear forces and bending loads. However, when the load is not applied along the centroid of the shear connector, it generates a torsional moment in addition to shear- and flexure-induced moments, impacting the performance of shear connectors. To address this phenomenon, this experimental study assesses the behavior of shear connectors, including studs, shear lugs, and rebars, both individually and in combination, under three different load eccentricities relative to anchors spacing connectors (0, 0.25, 0.50, and 0.75). The results are then compared with the control specimen (without eccentricity). The findings revealed that vertical shear lugs can significantly enhance the shear capacity, and ACI 318-19 is conservative in this regard by 41.5% for a relative load eccentricity of 0.75. Nonetheless, it gives good estimations of the shear capacity of connectors without vertical shear lugs. HIGHLIGHTSContributing to the very limited data on the performance of anchors under the combined action of shear and torsion.ACI 318-19 [1] provides reliable estimations of shear strength for studs/rebars, both with and without eccentricity. However, it tends to be conservative by 41.5% (for a relative eccentricity of 0.75) when horizontal and vertical shear lugs are utilized.Contributing to the very limited data on the performance of anchors under the combined action of shear and torsion.ACI 318-19 [1] provides reliable estimations of shear strength for studs/rebars, both with and without eccentricity. However, it tends to be conservative by 41.5% (for a relative eccentricity of 0.75) when horizontal and vertical shear lugs are utilized. [ABSTRACT FROM AUTHOR]