An enhanced water-lubrication method: Friction-reducing and diffusion properties of secondary lubricants.

To prevent severe friction between water-lubricated bearings (WLBs) and stern shafts under harsh conditions, a method is introduced that uses a lubrication pump to supply a small amount of secondary lubricant into the bearing for a short period of time. The effect of the secondary lubricant viscosity on friction-reducing performance is investigated by a modified block-on-ring friction and wear tester. The transfer process of the secondary lubricant within the bearing is observed with a self-designed visualization experimental platform. A flow model for capturing the diffusion of the secondary lubricant is developed, and the flow velocity equations are used as a "bridge" to link the mixed lubrication model and Volume-of-Fluid (VOF) model. The results indicate that injecting the secondary lubricant in the mixed lubrication state has the effect of rapidly reducing the friction coefficient, while supplying the lubricant in the elastohydrodynamic lubrication state tends to increase the friction coefficient. The backflow zones are primarily located at the bearing inner surface and the upper half of the fluid. The high-viscosity secondary lubricant separates into "free lubricant" and "adhesive lubricant" during the transfer process. The "oil-free zone" appears in the lubricating film due to the obstruction of lubricant diffusion by the "backflow effect". The area of the "oil-free zone" decreases with increasing lubricant viscosity and decreasing load. This study provides a reference for friction-reducing technologies of friction pairs under water-lubrication conditions. • Secondary lubricant can rapidly reduce friction coefficient in the ML state. • High-viscosity lubricant separates into two types of lubricant during diffusion. • The area of the "oil-free zone" decreases with increased lubricant viscosity. [ABSTRACT FROM AUTHOR]