Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature.

[Display omitted] • A PVDF/CA/LATP CSE is developed via a facile solution-casting process. • PVDF/CA ratio and LATP fractions affect CSE's crystallinity and structural porosity. • The optimized CSE exhibits a high ionic conductivity of 4.9 × 10-4 S cm−1. • The optimized CSE possesses a wide electrochemical window up to 5.0 V vs. Li/Li+. • An LFP-based cell containing PVDF/CA/LATP CSE delivers over 160 mAh g−1 capacity. To enhance energy density and secure the safety of lithium-ion batteries, developing solid-state electrolytes is a promising strategy. In this study, a composite solid-state electrolyte (CSE) composed of poly(vinylidene difluoride) (PVDF)/cellulose acetate (CA) matrix, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt, and Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 (LATP) fillers is developed via a facile solution-casting method. The PVDF/CA ratio, LiTFSI, and LATP fractions affect the crystallinity, structural porosity, and thermal and electrochemical stability of the PVDF/CA/LATP CSE. The optimized CSE (4P1C-40LT/20F) presents a high ionic conductivity of 4.9 × 10-4 S cm−1 and a wide electrochemical window up to 5.0 V vs. Li/Li+. A lithium iron phosphate-based cell containing the CSE delivers a high discharge capacity of over 160 mAh g−1 at 25 °C, outperforming its counterpart containing PVDF/CA polymer electrolyte. It also exhibits satisfactory cycling stability at 1C with approximately 90 % capacity retention at the 200th cycle. Additionally, its rate performance is promising, demonstrating a capacity retention of approximately 80 % under varied rates (2C/0.1C). The increased amorphous region, Li+ transportation pathways, and Li+ concentration of the 4P1C-40LT/20F CSE membrane facilitate Li+ migration within the CSE, thus improving the battery performance. [ABSTRACT FROM AUTHOR]