Back to Search Start Over

Additive-manufactured paper–PMMA hybrid microfluidic chip for simultaneous monitoring of creatinine and pH in artificial urine.

Authors :
Sheeraz, Asim Syed
Aiswarya, Edoth
Kumara, B. N.
Sonia, J.
Rodrigues, Relisha Viyona
Sheikh, Nazmin
Vidyasagar, Sachin
Kunder, Rachana. A.
Elangovan, Selvakumar
Mohanty, Priti Sundar
Prasad, K. Sudhakara
Source :
Analyst. 8/7/2024, Vol. 149 Issue 15, p3882-3890. 9p.
Publication Year :
2024

Abstract

Nowadays, kidney dysfunction is a common health issue due to the modernized lifestyle. Even though medications are commercially available to treat kidney diseases, early diagnosis is crucial and challenging. Clinically, measuring urine creatinine and pH has gained significant interest as a way to diagnose kidney diseases early. In the present work, we attempted to develop a low-cost, robust, accurate and naked-eye colorimetric method to determine both creatinine levels and pH variations in artificial urine samples using a simple 3D-printed hybrid microfluidic device. Creatinine was detected by the incorporation of the traditional Jaffe test onto the hybrid paper–PMMA microfluidic device and pH (4–8) was measured by a simple anthocyanin test. Notably, the tests were established without employing any sophisticated or costly instrument clusters. The developed 3D-printed microfluidic probe showed a limit of detection (LOD) of 0.04 mM for creatinine over a concentration range of 1–10 mM, with a regression coefficient (R2) of 0.995 in laboratory conditions. Interestingly, the experimental data obtained with artificial urine exhibited a wide linear range from 0.1 mM to 5 mM under different pH values ranging from 4 to 8 in the presence of matrices commonly found in urine samples other than proteins, indicating the potential use of this method in pre-clinical analysis. Since the wide linear range of urine creatinine in artificial urine samples falls well below the clinically relevant concentrations in humans (0.07–0.27 mM), the developed lab-on-chip device is further suitable for clinical evaluation with proper ethical clearance. This 3D-printed hybrid microfluidic colorimetry-based creatinine detection and pH indicator platform can be beneficial in the healthcare sector due to the on-site testing capability, cost-effectiveness, ease of use, robustness, and instrument-free approach. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
00032654
Volume :
149
Issue :
15
Database :
Academic Search Index
Journal :
Analyst
Publication Type :
Academic Journal
Accession number :
178562942
Full Text :
https://doi.org/10.1039/d4an00796d