Temperature-sensitive polymer grafted with nano-SiO2 improves sealing and inhibition performance of shale water-based drilling fluid.

Drilling fluid loss is an important factor restricting oil and gas production. The development of pores and micro-fractures in shale formations is the main cause of drilling fluid loss. In this study, silane coupling agent modified nano-SiO 2 was used as the rigid core, and N-isopropylacrylamide and 2-hydroxyethyl methacrylate were used as the flexible outer shell. The temperature-sensitive blocking agent PKSHN was synthesized by inverse microemulsion polymerization method. PKSHN was analyzed and tested through Fourier transform infrared spectroscopy, simultaneous thermal analysis, transmission electron microscopy, dynamic laser scattering and other methods. The results show that PKSHN can achieve a hydrophilic/hydrophobic transition under the response temperature, with a median particle size of 189.35 nm, which can form a hydrophobic layer on the shale surface and reduce fluid intrusion into the shale formation. This study tested the performance of three drilling fluids with different densities by adjusting the amount of weighting agent. The results showed that the high-temperature and high-pressure filter losses of the three different densities of drilling fluids were all less than 10 mL. The addition of PKSHN can effectively reduce fluid loss. The rolling recovery experiment and linear expansion experiment show that after aging for 16 h at 150 °C, the rolling recovery rate is above 90 % and the linear expansion rate is below 7 %, indicating that the addition of PKSHN can effectively control the hydration expansion of shale. [Display omitted] [ABSTRACT FROM AUTHOR]