Electrochemical Determination of Enrofloxacin Using an Electrode Composed of Graphite Nanosheets Fabricated by Expansion in Dimethyl Sulfoxide.

A sensor based on graphite nanosheets was fabricated through the electrochemical expansion of a graphite electrode in dimethyl sulfoxide for the sensitive electrochemical determination of enrofloxacin. The modified electrode surface exhibited a distinctive structure of nanoplates, characterized by layer thickness ranging from a few nanometers to ten nanometers. The developed electrode displayed notable electrochemical properties, including a faster charge transfer rate and a larger electrochemically active surface area, which was 1.3 times greater compared to the unmodified electrode. As a result, the sensor improved square wave voltammetric signals for enrofloxacin, exhibiting a 2.4-fold enhancement compared to the unmodified electrode. By optimizing the experimental parameters such as electrode fabrication conditions, pH of analytical solution, and adsorption time for enrofloxacin, the sensor demonstrated good reproducibility and a strong linear correlation over two ranges of enrofloxacin concentrations from 0.05–0.15 μM and 0.1–20 μM. The limit of detection was determined to be 0.002 μM. The sensor was successfully employed for the determination of enrofloxacin in spiked surface water samples before and after treating enrofloxacin by a photocatalytic method. The obtained results exhibited consistency with those obtained using a liquid chromatography-tandem mass spectrometry reference method, and a high recovery rate of 105.5% further confirmed the reliability of the proposed method for enrofloxacin detection. [ABSTRACT FROM AUTHOR]