Influence of bottom protection structures group on the hydraulic characteristics in sharp bends.

AbstractBottom protection (BP) is a commonly used engineering measure in river training. A 3D hydrodynamic numerical model is established to study the influence of the overall arrangements of BP structures on the hydraulic characteristics of the sharp bends. Under the action of the BP structures group, the maximum longitudinal flow velocity is closer to the water surface vertically and closer to the concave bank laterally compared with no BP. The high shear stress zones on the riverbed at the exit straight section of the bend do not occur. The so-called primary circulation after the apex of the bend gradually weakens and disappears. If the coverage rate of BP is increased to 1.5 times that of the sequential BP, the average longitudinal flow velocity near the bottom of BP decreases by 10% and the average bed shear stress at the outlet section of the bend decreases by 35%. In the staggered BP condition, the average bed shear stress at the outlet section of the bend is reduced by 23% compared with the sequential BP. Moreover, the results show that the protection effects of the dense BP and the staggered BP are better than that of sequential BP. [ABSTRACT FROM AUTHOR]