Investigation of hot deformation behavior of forged 42CrMoA steel by cellular automata method based on topological deformation technique.

To investigate the dynamic recrystallization (DRX) behavior of forged 42CrMoA steel during hot deformation, the hot deformation experiments of forged 42CrMoA steel under different deformation conditions (strain rate, temperature, and strain) were carried out in this paper. The hot deformation activation energy of forged 42CrMoA steel was determined to be 413627.2 J · mol - 1 . The constitutive model and DRX kinetic model of the steel were established. Analyzing the reconstructed parent phase grains reveals that when the strain is constant, as the deformation temperature increases and the strain rate decreases, the average size and DRX volume fraction of the parent phase grains gradually increase, and the peak stress gradually decreases. When the deformation temperature and strain rate are constant, as the strain increases, the average size of the parent phase grains gradually decreases, and the volume fraction of DRX gradually increases. Based on the cellular automaton theory model and considering the influence of grain deformation on the DRX process, a cellular automaton dynamic recrystallization (T-DRX-CA) model for forged 42CrMoA steel based on topological deformation technology was established, and the microstructure evolution under different deformation conditions was simulated. The microstructure evolution under different deformation conditions was simulated, which was compared with experimental results. The results showed that the average errors between the simulated and experimental values of the average grain size of the parent phase, the volume fraction of DRX, and peak stress were all less than 8%, and the simulated results were in good agreement with the experimental values, which indicates that the established model can accurately predict the DRX behavior of the forged 42CrMoA steel in the process of hot deformation. The hot deformation behavior of forged 42CrMoA steel under different deformation conditions was investigated by a cellular automaton dynamic recrystallization (T-DRX-CA) model based on topological deformation technique. The results showed that the average errors between the simulated and experimental values of the average grain size of the parent phase, the volume fraction of DRX, and peak stress were all less than 8%, and the simulated results were in good agreement with the experimental values, which indicates that the established model can accurately predict the DRX behavior of the forged 42CrMoA steel in the process of hot deformation. [ABSTRACT FROM AUTHOR]